Software & Connectivity

Ashdale are delighted to present our range of Riello Software and Connectivity Solutions for Uninterruptible Power Supplies to the Northern Ireland market

We have a range of software and accessories are characterized by simplicity and intuitiveness, security and reliability, highly customizable. 

In Riello we represent a Global UPS company with full local support. We are an officially recognised sales and service partner for Riello UPS. Many systems and accessories in stock in Belfast for immediate dispatch or collection

Communication Software

PowerShield³ provides efficient, user-friendly UPS management, displaying all major operational information such as input voltage, applied load and battery charge. The software also provides detailed
information on fault conditions and UPS operating states. Developed with a client/server architecture, it is the ideal tool for managing multi-platform network systems.

Supervision software

PowerNETGuard software centralises UPS management using network interface (SNMP) communications. It is ideal for Data Centre managers and medium to large sized networks. PowerNETGuard uses the RFC1628 standard Management Information Base (MIB) and ensures standardised UPS management wherever they are located.

Network card

The NetMan 204 network agent allows UPS directly connected over LAN 10/100 Mb connections to be managed using the main network communication protocols (TCP /IP , HTTP HTTPS, SSH, SNMPv1, SNMPv2 and SNMPv3). It is the ideal solution for the integration of UPS over Ethernet networks with Modbus/TCP and BACnet/IP protocols. It was developed to integrate UPS into medium-sized and large networks, to provide a high level of reliability in communication between the UPS and associated management systems.

New features include the LDAP and Active Directory user authentication and the full integration with VMware’s Esxi and vCenter server for VM and host graceful shutdown.

Environmental monitoring integrated with the UPS

The Netman environmental sensors monitor and record environmental conditions as well as activities in protected areas and at the premises where the UPS is installed.
The environmental sensors allow extensive control and management of the environment around the UPS by monitoring the temperature, humidity, triggering devices such as fans or locks and communicating the values via web, SNMP and via the PowerShield³ software.

ModBUS Protocol Converter

The MultiCOM 302 protocol converter may be used to monitor the UPS using the MODBUS/JBUS protocol on RS485 or RS232 serial line. It will also manage a second, independent RS232 serial line that can be used to connect other devices such as the Netman 101 or a PC that uses the PowerShield³ software.

Serial link duplexer

The MultiCom 352 is a serial duplexer that allows two devices to be connected to a single serial port on a UPS.
It can be used where numerous serial connections and multiple polling of UPS are required, and is ideal for LAN networks with a firewall.

Contacts / EPO board

MultiCOM 384 provides a set of relay contacts to provide UPS alarm and status indication.
The contacts are connected through terminal connections. Signal contacts include Emergency Power Off (EPO), Remote Shut Down (RSD), On Battery, On Bypass, Alarm and Battery low warnings with potential free contacts on normally close or normally open contacts.

Profibus Protocol converter 

The MultiCOM 411 connects a Riello UPS to a Profibus DP Network. In industrial environments, the Gateway integrates UPS management and monitoring into a control system. The Gateway uses the field bus design – one of the most popular used for communicating between devices such as automation control systems and distributed I/O hardware.

Protocol converter

Multi I/O is a device that integrates UPS into a control system using fully configurable input and output relay signals.
It can be used to connect two devices to a single UPS serial communication port.
It can be used anywhere where several serial connections are required for multiple polling of the UPS.
It can also communicate on RS485 lines using the MODBUS/JBUS protocol.

Remote Monitoring Panel

MultiPanel is a remote monitoring device that can provide a detailed UPS status overview in real time. It is compatible with all Riello UPS and can display values for UPS specific input and output supplies, and battery set measurements.

MultiPanel has a high-definition graphical display and can report in 7 languages: English, Italian, German, French, Spanish, Russian and Chinese. It has 3 independent serial ports, one of which allows for UPS monitoring via the MODBUS/JBUS protocol (on either an RS485 or RS232 serial line). The others can be used with devices such as the Netman 204 or a PC running PowerShield³ software.

We have experts with a wealth of knowledge ready to help you at our Belfast HQ.

Call us on 02890783000 or use the contact form and we’ll get back to you.